Maintenance Instructions; Technical Specifications - Gas Dryer - Maytag MDG17MN Instructions D'installation

Maintenance instructions:

Clean lint screen after each cycle.
I
Removing accumulated lint (disconnect dryer from electricity
I
and gas supplies before starting this task):
From inside the dryer cabinet:
•
Lint should be removed every 2 years or more often,
depending on dryer usage. Cleaning should be done
by a qualified person.
From the exhaust vent:
•
Lint should be removed every 2 years, or more often,
depending on dryer usage.
TECHNICAL SPECIFICATIONS – GAS DRYER
10
MAINTENANCE INSTRUCTIONS
If dryer does not operate, check the following:
Electric supply is connected.
I
Circuit breaker is not tripped or house fuse is not blown.
I
Door is closed.
I
Controls are set in a running or "ON" position.
I
START button has been pushed firmly.
I
Check that gas supply shut-off valves are set in open position.
I
If you need assistance:
Contact your authorized Maytag
or visit: www.MaytagCommercialLaundry.com. When you call,
you will need the dryer model number and serial number.
Both numbers can be found on the serial-rating plate located
on your dryer.
® Commercial Laundry distributor