Connection To The Amplifier; Connection To The Computer; Mains Connection; How To Set The Phono/Line Switch - Dual DT 210 USB Mode D'emploi

Connecting the record player

Connection to the amplifier

 Connect the cinch (RCA) audio cable 14 to the
LINE/AUX or phono jack on the amplifier.
Note:
Make sure that you make the correct left and right
channel connections (red = right channel, white = left
channel).

Connection to the computer

 Connect the USB terminal 16 with a free USB port
on your computer. Follow the instructions on p. 14.

Mains connection

 Insert the mains plug into a socket.

How to set the PHONO/LINE switch

 Move the PHONO/LINE switch 15 to PHONO if the
record player is connected to the PHONO jacks.
 Move the PHONO/LINE switch 15 to LINE if the
record player is connected to the LINE jacks.
12
Removing/attaching the stylus
protection cap
 Before playing a record, you must remove the stylus
protection cap from the pickup 7. To do so, pull off
the cap forwards.
 It is recommended that you put the stylus cap back
on after playing a record to protect the stylus.