Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. How to change the Display
Settings
5.1 How to show / hide the Connection
Arrows
When quite a few radio connections are active it is possible to hide certain
arrows to improve the overall clarity. Which connections arrows shall be hid-
den can be arranged according to the connection quality.
→ In the software window
SETTINGS
Show Link Quality
in the section
click on the check box of the connection quality, whose arrows you want to
show / hide.
❑ If you disable all checkboxes, no connection arrows will be displayed.
5.2 How to set the Display of the Cir-
cles
5.2.1 How to arrange the Circles
In the main window of the ALMEMO
®
470 MeshViewer the data logger and
the connected wireless sensors are represented by circles that are posi-
tioned randomly. You can move the circles freely within the software window.
→ In the main window of the ALMEMO
®
470 MeshViewer click on a circle
with the left mouse button. Drag the circle to the desired position in the main
®
window of the ALMEMO
470 MeshViewer where you want to position it.
Release the circle on the desired position.
❑ You can distinguish the wireless sensors by their serial number.
5.2.2 How to set the Size of the Circles
→ Click on the slide control in the line
Mesh Node Size
and move it to the
left respectively to the right.
➢ The size of the circles that represent the data logger and the connected
wireless sensors will be enlarged or downsized equally.
- 19 – English
Publicité
Table des Matières
