Installation Tips - INVENTOR EP3-WiFi16L Manuel De L'utilisateur

Installation tips

3) Ensure the filter is clean.
4) Place unit in vertical
operating position and allow
2 hours before initial use in
order to avoid malfunctions.
EN
1) Do not block or restrict the
airflow around the unit. Make
sure the air inlet exhaust
grills are not obstructed.
Allow 20cm of clearance
around the unit and 40cm
above.
2) Place the unit in an area
where the temperature
levels will not fall bellow 5ºC
(41ºF) There is a possibility
the coils will collect frost
at temperatures that are
under 5ºC (41ºF), which may
result in low performance.
5) Before the initial operation, please check, if
the water level switch, located within the water
bucket area, is in the right position.
7