Klarstein ARCTIC-PORTER Mode D'emploi page 24

EN
24
Problem
The ice-making cycle
seems normal but no ice is
produced.
Poor ice-making result.
Possible causes
The ambient temperature
or water temperature is
too high.
Refrigerating system leaks
Refrigerating system is
blocked.
Poor heat dissipation.
The water temperature is
too high.
The ambient temperature is
too high.
Solution
Start the ice-making cycle
at an environment with an
ambient temperature less
than 32 °C and fill the
water reservoir with some
cold water.
Contact costumer service.
Contact costumer service.
Leave a 15 cm clearance
on all sides of the ice
cube maker for proper
ventilation.
Fill the water reservoir with
water ranges between
8 °C and 28 °C.
Operate the ice cube
maker at an environment
with an ambient
temperature between
10 °C and 32 °C.