Tracking The Same Programme-Network-Tracking Reception - JVC EXAD KD-AVX2 Manuel D'instructions

PTY Standby Reception
PTY Standby Reception allows the receiver
to switch temporarily to your favorite PTY
programme from any source other than AM.
• If the DAB tuner is connected, Standby
Reception also works to search for a DAB
service.
To activate and select your favorite PTY
code for PTY Standby Reception,
1
MENU
2 Select "Mode", "PTY Standby", then the
PTY code below "Off".
PTY code list appears.
3 Select a PTY code you want.
either lights up or flashes.
• If lights up, PTY Standby Reception is
activated.
• If flashes, PTY Standby Reception is not
yet activated.
To activate PTY Standby Reception, tune in
to another station (or DAB service) providing
these signals. The PTY indicator will stop
flashing and remain lit.
To deactivate the PTY Standby Reception,
select "Off" on "PTY Standby" in the "Mode"
menu.
goes off.
ENT
Tracking the same programme—
Network-Tracking Reception
When driving in an area where FM reception
is not sufficient enough, this receiver
automatically tunes in to another FM
RDS station of the same network, possibly
broadcasting the same programme with
stronger signals (see the illustration below).
When shipped from the factory, Network-
Tracking Reception is activated (
when the power is turned on for the first time).
To change the Network-Tracking Reception
setting, see "AF-Regional" on page 40.
Programme A broadcasting on different frequency areas (01 – 05)
lights up
17