Storing Stations In Memory; Fm Station Automatic Presetting - JVC EXAD KD-AVX2 Manuel D'instructions

To tune in strong-signal FM station only
1
MENU
2 Select "Mode", "DX / Local", then "Local".
3 Finish the procedure.
ENT
Lights up when "Local" mode is activated.
Only stations with sufficient signal strength
will be detected.
To tune in to all receivable stations, repeat the
same procedure to set "DX / Local" to "DX".
The LO indicator goes off and the DX indicator
lights up.

Storing stations in memory

You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential Memory)
After selecting the FM band (FM1 – FM3) you
want...
1
MENU
2
Select "Mode", then "SSM".
3
ENT
"SSM" is shown until automatic presetting
is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
13