diversey TASKI swingo 1650 Mode D'emploi page 88

Service intervals
TASKI machines are high-quality machines that have been
checked for safety in the factory and by authorized inspectors.
Electrical and mechanical parts are subject to wear and aging
after a longer period of use.
• In order to maintain operational safe-
ty and readiness for use, the ma-
chine must be serviced whenever the
maintenance indicator lights up (fac-
tory setting is 550 working hours) or
at least once a year.
Notice:
In case of extraordinary use and/or insuffi-
cient maintenance, shorter intervals are
required.
Service center
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of mal-
functions.
The required data are provided on the nameplate of your ma-
chine. The address of your closest TASKI service partner is
provided on the last page of these instructions of use.
Blade change swingo 1650
1
5
7
8
• Undo the four socket screws (1, 2, 3, 4).
• Separate the squeegee body from the squeegee core (5,
6).
• Remove the blades (7, 8).
• Clean the squeegee body and both squeegee cores under
running water.
• Mount the "turned" or new blades onto the squeegee core.
• Reinsert the squeegee core into the squeegee body.
• Retighten the four socket screws.
86
2
3
4
6
Blade change swingo 1850
• Unscrew the four star screws (1) from the squeegee.
• Separate the squeegee body (2) from the squeegee core
(3).
• Remove the blades (4).
• Clean the squeegee body and both squeegee cores under
running water.
• Mount the "turned" or new blades onto the squeegee core.
• Reinsert the squeegee core into the squeegee body.
• Retighten the four star screws.
1
2
3
4