Safety Instructions For Moving The Assembly Platform; Dismantling, Storage And Transport; Dismantling; Storage - zarges Z600 Mode D'emploi

5.2 Safety
instructions
for moving
the assembly
platform
5.3 Safety
instructions
for braking

6. Dismantling, storage and transport

6.1 Dismantling

6.2 Storage

6.3 Transport

7. Repairs

7.1 Cleaning

20
> See illustrations section of this manual.
W
ARNING
D
ANGER OF SERIOUS OR EVEN FATAL INJURY IF THE PRODUCT TOPPLES OVER WHILE MOVING IT
Follow these basic rules to prevent dangerous situations arising:
> Do not move the product as long as there are persons, material or tools on the
platform.
> Always move the product slowly and by hand.
> Do not use towing trucks or forklifts to move the product. Avoid collisions.
> Only move the product in longitudinal or diagonal direction and on a level, firm
and unobstructed surface.
> See illustrations section of this manual.
> Dismantle the product by following the steps for assembly in reverse order.
> Secure the swivel castors against rolling away during dismantling by pressing
down the central brake.
> Do not lift the product by the guardrails or braces.
> Store components in a location where they are protected from the elements,
and if possible, store them laid flat.
> Fold the product and pack it for transport.
> Use straps to secure components against sliding or falling during transport.
> Do not throw components during loading or unloading.
> Clean the product with a solution of water and a standard cleaning agent.
W
ARNING
D
ANGER OF SLIPPING CAUSED BY WATER ON THE STANDING SURFACES
Dry standing surfaces and holding devices thoroughly after cleaning.
!
!