Radio; Storing Stations In Memory; Searching For A Station; Selecting A Preset Station - JVC KW-DB60AT Manuel D'instructions

Radio

Radio
A
"ST" lights up when receiving an FM stereo broadcast with sufficient signal strength.

Storing stations in memory

Manual presetting
You can preset up to 18 stations for FM and 6
stations for AM.
While listening to a station...
(Hold)
The preset number flashes and "MEMORY"
appears. The current station is stored to the
selected number button (1 - 6).
- - - - - - - - or - - - - - - - -
1
(Hold)
"PRESET MODE" flashes.
2 Select preset number.
The preset number flashes and "MEMORY"
appears.
Auto presetting (FM only)
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
1
(Hold)
2
"SSM" flashes. When all the stations are stored,
"SSM" stops flashing.
To preset <SSM 07 – 12>/<SSM 13 – 18>,
repeat steps 1 and 2.
8 | ENGLISH
B
B<TUNER>
B<SSM>
B<SSM 01 – 06>

Searching for a station

Select <FM> or <AM>.
A
Auto search. (Press)
B
Manual search. (Hold)
"M" flashes, then press the button repeatedly.

Selecting a preset station

- - - - - - - - or - - - - - - - -
You can also select a preset station using J / K.
Setting the Radio Timer
You can tune in to a preset station at a specific
time regardless of the current source.
1
(Hold)
2
[OFF]
Cancels Radio Timer.
ONCE Activates once.
DAILY Activates daily.
3 Select the preset station.
4 Set the activation time.
5 Press MENU to exit.
M lights up after the Radio Timer has been set.
0
Only one timer can be set. Setting a new timer
0
will override the previous setting.
The Radio Timer will not activate if the unit is
0
turned off or if <AM> is set to <OFF> after
selecting an AM station for the timer.
B<TUNER>
B<RADIO TIMER>
B<OFF>/<ONCE>/
<DAILY>
B<FM>/<AM>/<DAB>
B<01> ... <18> for FM/
<01> ... <06> for AM/
<01> ... <18> for DAB