Lubrication - Ingersoll Rand 2190Ti Mode D'emploi

Ingersoll-Rand No. 50
Model Handle
I.D. Type
1" sq. dr.,
2190Ti grip
inside trigger
1" x 6" extended
2190Ti-6 grip sq. dr, inside
1" x 6" extended
2190DTi-6 D sq. dr, inside
Tested in accordance with ISO15744 at free speed.
Tested to EN/ISO8662–7 loaded with frictionbrake to 9 RPM
Measurement uncertainty of the Sound Pressure Level 'Kpa' = 3dB(A)
▲
Measurement uncertainty of the Sound Power Level 'Kwa' = 3dB(A)
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be

LUBRICATION

Ingersoll-Rand No. 170
INSTALLATION
Main Line(s) Inner Ø
to be 3X Size of
Air Tool's Inlet Ø
To Air
System
To Air
Tool
Emergency
Shut-Off
Valve
Lubricator Regulator
Drain Regularly
SPECIFICATIONS
Impacts Recommended
Drive
/ min. Torque Range
in. bpm ft-lbs (Nm)
875
(204-1627)
875
(204-1627)
trigger
875
(204-1627)
trigger
SAVE THESE INSTRUCTIONS. DO NOT DESTROY.
separated by material so that they can be recycled.
Always use an air line lubricator with these tools. We
recommend the following Filter-Lubricator-Regulator Unit:
For International- No. FRL30-C6-A29
For USA- No. C31-06-G00
After each forty-eight hours of operation, or as experience
indicates, inject about 4 cc of Ingersoll-Rand No. 170 Grease
into the Grease Fitting (18).
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool's Inlet Ø
R
L
F
Filter
FRL
Compressor
Sound Level
dB (A)
Pressure Power
( Lp) ( Lp)
150-1200
103.8 116.8
150-1200
103.8 116.8
150-1200
103.8 116.8
3
(Dwg. TPD905-2)
Inlet
Vibrations
Connection
Level
(Thread)
2
NPT
m/s
8.3 1/2
9.8 1/2
9.8 1/2
Form P7707, Edition 1
Minimum
Inside Ø
(Air Hose)
in. (mm)
1/2 (13)
1/2 (13)
1/2 (13)