One for All Essential 4 Mode D'emploi page 11

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5.
RESET VOLUME CONTROL
To reset the volume control to the original setting:
If you have set up your remote to control the Volume of a Sound Bar or
Audio Device, the Watch TV and Watch Movie Activity will automatical-
ly control the volume of this device.
CHANNEL SHORTCUT MACROS
As well as their normal functionality, the Red, Green, Yellow and Blue
keys can be reprogrammed to select your favourite channels by genre.
If you press and release each of these keys, they will perform exactly
the same function as your original remote.
However they can be reprogrammed so that when they are held down
for 3 seconds they will send a channel number, then when held down
again for 3 seconds, they will send a different channel number. You can
group these channels by genre such as Sports, News, Movies and Kids.
The procedure to program is as follows: Say for example, the first
3 Sports channels are on channels 200, 201 and 239, you can assign
shortcuts to these channels on the Red (Sports) key. To do this:
Firstly select the device you use to watch live TV. For example if you are
a Bell subscriber and you have set up your Set Top Box on the STB key,
press STB. Now you can program the channel shortcuts.
1.
2.
3.
4.
5.
6.
The LED will blink twice and the shortcuts are now programmed. When
watching live TV, simply hold down the Red key for 3 seconds, and
the first Channel Shortcut will be sent (in this example channel 200).
The next time you hold down the Red Key, the shortcut for the next
Channel Shortcut will be sent (in this case channel 201).
You can reprogram each of the different colour keys with different
lists of channel numbers, by holding down the Setup and a different
coloured key at step 1, and pressing and releasing the same key at
step 3. Each coloured key has a different icon to help you remember
the channels that you have stored there. You can program up to 10
different channel numbers per key.
712832 Essential-4 CAN_Manual URC3640 RDN1111220 incl. Codelist.indd 11
712832 Essential-4 CAN_Manual URC3640 RDN1111220 incl. Codelist.indd 11
If they work, your remote is set up. If not try again from step 1
using the next code in the list.
Hold down SETUP and VOLUME DOWN keys until
the LED blinks 4 times. Volume control is now reset.
Hold down the SETUP key and the Red key until the
LED blinks twice
Enter the first channel number (200)
Press and release the Red key
Enter the next channel number (in this example 201)
Repeat Steps 3 and 4 for each channel shortcut you want to add
After entering the last channel number you want,
press and hold the SETUP key.
11
11-12-2020 12:13
11-12-2020 12:13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Urc3640

Table des Matières