Assembly And Operation - oneConcept 10031260 Mode D'emploi

Open the Cover (12) at the
bottom of the Outer Bowl. In-
sert four AA batteries. Mind po-
larity. Close the battery case.
Apply a circular layer of ligh-
ter gel on Ignition Plate (6)
(approx.10mm or 0.4 inches).
Place Ignition Plate into Inner
Bowl.

Assembly and Operation

Place the Inner Bowl (7) into
the Outer Bowl (8).
Turn on the OFF/MAX control
button (10) on Outer Bowl.
Turn it clockwise to Maximum
(MAX) position. Do not touch
the flame!
Fill Charcoal Container
with Charcoal (approx. 250g).
Put Cover (4) On Charcoal
Container (5).
Light gel with a match.
(5)
9