Cleaning; Descaling - Krups SAVOY EC313 Manuel D'utilisation

KR_CAFETIERE_SAVOY_EC313_NAFTA_NC00131759_Mise en page 1 10/09/15 09:49 Page11
To set the keep warm duration:
■ If the keep warm function has already been activated, press KEEP WARM (s) once to deactivate it.
■ If it has not been activated, press KEEP WARM (s) to select the keep warm duration. The light on the KEEP
WARM button will turn on. The keep warm function may be set for 15 minutes up to 4 hours by using the
H (n) and MIN (o) buttons. Fig 17 and 18.
■ Set by pressing the brew button (k), alternatively your settings will be validated automatically after
5 seconds, by default. Fig 19.
■ To cancel the keep warm function, press the KEEP WARM button (r); the light on the button will turn off.
■ You can change the keep warm duration while it is in operation by using the H (n) and MIN (o) buttons.

7. CLEANING

■ To remove the used coffee grounds, remove the filter and the filter holder from the coffee maker. Figs 20a.
and 21a.
■ Throw the coffee grounds and filter paper in the garbage. Figs 20b. and 21b.
■ Do not clean the machine if it is still hot.
■ Wash the removable filter holder and the permanent filter in warm soapy water. The carafe can go in the
dishwasher.
CAUTION: Do not place the carafe in the microwave.
Do not put other parts of the coffee maker into the dishwasher.
■ Clean the coffee maker with a damp cloth or sponge. Never use abrasive or strong products on any part of
the coffee maker.
■ To clean the stainless steel parts of your coffee maker, dampen a soft cloth or sponge with warm water.
Wipe carefully with a dry cloth.
■ For difficult stains, use a cloth with white vinegar.
■ Do not immerse the appliance in water or under the tap.

8. DESCALING

■ Why descale?
- Limestone forms naturally in your coffee maker. Descaling preserves the coffee maker and ensures it will last
longer and provide quality coffee over time. Limestone can permanently affect the machine's performance.
Malfunctions associated with scaling will not be covered by the warranty if the product is returned.
When to descale?
- When your machine needs descaling, the CLEAN button light will come on.
- The descaling frequency depends on the hardness of the water and the number of brew cycles. If you notice
the following signs: longer cycle time, excessive steaming, more noise at the end of the cycle, stopping mid-
cycle, this means your machine is scaled.
- Your coffee maker should be descaled around once a month depending on the hardness of the water.
- If your machine needs descaling, the CLEAN button (r) light will flash 3 times at the end of the cycle.
NB: If you press the BREW button (l) while the CLEAN button (r) light is on, the descaling cycle
will start instead of the brew cycle.
How to descale your KRUPS coffee maker
■ Remove the filter cartridge (u). Figs 22 and 23.
■ Use the KRUPS® descaling solution or 17 fl. oz of white vinegar diluted in 17 fl.oz of cold or water at room
temperature or 1.5 oz of citric acid diluted in 17 fl. oz until complete dissolution of crystals. Fig. 24.
■ Pour the solution into the water tank (without coffee). Fig. 25.
■ Press the CLEAN button (r) followed by the BREW button (l) to start the descaling cycle. Fig. 26.
■ The cycle lasts for 30 min.
■ Wait until the end of the cycle.
11