Philips AVENT SCD843/01 Mode D'emploi page 23

1 1
VIDEO 20°C 20°C
Sensitivity
Low
Medium
High
Very High
3 Press the left part of the control button to save the new setting and to
Vibration
1 Press the right part of the control button to access the vibration options.
1
VIDEO 20°C
Vibrate
On if speaker is off
Always On
Off
2 There are three options for vibration:
1
VIDEO 20°C
Vibrate
On if audio is muted
Always on
Off
3 Press the left part of the control button to save the new setting and to
Temperature
The temperature sensor enables you to monitor the temperature in your
baby's room.
Note: The current temperature in your baby's room is shown in the status
bar of the parent unit.
The louder your baby sounds, the lower the sensitivity can be set on the
parent unit.
Note: In AUDIO and VIDEO mode, you will have continuous sound when
the sensitivity level is on 'very high'. Otherwise, low sounds will be muted.
Tip: The sensitivity level can be adjusted so you will always hear your
baby without the disruption of other sounds. When there is a lot of
background noise, turn the sensitivity lower so you will not hear these
sounds through the parent unit.
return to the main menu.
a 'On if audio is muted': When volume is set to minimum (muted) the
parent unit will vibrate when sound is detected from the baby unit and
above sensitivity level.
b 'Always on': Parent unit will always vibrate when sound is detected
from the baby unit and above sensitivity level.
c 'Off': Parent unit will never vibrate.
When vibration is on, the parent unit will vibrate when your baby cries or
makes sounds, according to the sensitivity level you have selected. The
parent unit also vibrates when the temperature alert is on and a
maximum or minimum temperature is reached or when the parent unit
lost connection with the baby unit.
return to the main menu.
23
English