Replacing The Shaving Heads - Philips 7000 Série Mode D'emploi

30
English

Replacing the shaving heads

2
1
1
2
1 Switch off the shaver.
2 Press the release buttons on the shaving unit
and pull the shaving head holder off the
shaving unit.
3 Turn the retaining rings anticlockwise and
remove them. Place them aside in a safe place.
4 Remove the shaving heads from the shaving
head holder.
Discard the used shaving heads immediately to
avoid mixing them with the new shaving heads.
5 Place new shaving heads in the holder.
6 Place the retaining rings back onto the shaving
heads and turn them clockwise to reattach the
retaining ring.