Cleaning And Maintenance - GARDEO PRO GPTDE40V34-LI Traduction De La Notice Originale

OPERATION
Inserting the Battery
Lift up battery cover .
Fit battery , when correctly fitted a "click"will be
heard.
If the mower is not going to be used immediately
fit isolator key as shown in the storage position.
Starting/stopping the mower
▪ Insert the key into its hole.
▪ Press and hold the start button. Pull the switch
lever
towards the handle and release the button to start
the mower.
▪ To stop the mower, release the switch lever
Setting blade height
When shipped, the wheels on the mower are set to
a low-cutting position. Before using the
mower for the first time, raise the cutting position to
the height best suited for your lawn.
To adjust the blade height
Remove key and battery pack.
▪
To raise the blade height, grasp the height
▪
adjustment lever and move it toward the
front of the mower.
To lower the blade height, grasp the height
▪
adjustment lever and move it toward the
back of the mower.
Reinstall key and battery pack when you are
▪
ready to mow.

CLEANING AND MAINTENANCE

Cleaning
Keep all safety devices, air vents and the motor
▪
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it with
compressed air at low pressure.
We recommend that you clean the device
▪
immediately each time you have finished using
it.
Clean the equipment regularly with a moist cloth
▪
and some soft soap. Do not use cleaning agents or
solvents; these could attack the plastic parts of the
equipment. Ensure that no water can seep into the
device.
Never use solvents such
as petrol, alcohol, ammonia
solvents may damage the
Blade maintenance
Regularly remove grass and dirt from the blade.
▪
At the beginning of the gardening season,
▪
carefully examine the condition of the blade.
If the blade is very blunt, sharpen or replace the
▪
blade.
If the blade is damaged or worn, fit a new blade.
▪
If the blade is slipping, put the screwdriver into the
location hole, tighten the blade by wrench.
Be careful not to cut yourself.
Use heavy-duty gloves or a
cloth to grip the blade.
Only use the specified
Do not remove the impeller
Replacing the blade
For safety reasons, we recommend having the
blade replaced by an authorized professional.
water, etc. These
plastic parts.
replacement blade.
for any reason.