osann FOX 2 Manuel D'instructions page 20

EN
Attaching the lateral protection
structure
•
There are devices to attach the lateral protection
structure at both sides of the seat bucket.
•
Secure the lateral protection structure on the door
side, depending on what side of the vehicle you
install the child car seat in.
•
To fasten, push the clasps on the lower side of the
lateral protection structure into the slots provided
on the seat bucket of the child car seat.
•
Push the clasps in the opposite direction to re-
move the lateral protection structure.
•
The child car seat is equipped with a lateral pro-
tection structure. This can be installed on both the
left hand side and the right hand side of the child
car seat.
Moving the child car seat
•
Place the child car seat in the desired position
(backwards or forwards facing) on the fastening
points of the Isofi x base station. Press the child car
seat onto the station until you hear a "click".
•
Please ensure that the locking display points to the
green base station. Only then is the child car seat
fi xed securely in its position.
•
In order to release the child car seat from the Isofi x
base station, use the unlocking lever on the front
side of the base station and lift the seat out of its
position.
- 20 -