Stopwatch - Oregon Scientific RA202 Manuel D'utilisation

4. If you are in timer 1 (user-
selectable countdown timer)
setting, use + or - to enter the
values you require. If you want to
use the stopwatch function, simply
change all values to zero.
Once you have set the timer you wish to use, you can
perform the following functions:
TIMER 1, 2, 3 / TIMER 1, 2, 3 / INSTRUCTION INSTRUCTION

STOPWATCH

Start / stop Start / stop Press ST / SP Press
Pause / resume Pause / resume Press Press ST / SP
Edit time while Edit time while Press + or - to make the timer Press
timer is running timer is running increase or / decrease to increase or / decrease to
the nearest minute the nearest minute
Reset timer / Reset timer / Stop timer / stopwatch. Press and Stop timer / stopwatch. Press and
stopwatch stopwatch hold hold SET
Save lap Save lap Press Press LAP while the stopwatch
(lap function can (lap function can is running is running
only be used in
stopwatch mode) NOTE The stopwatch and lap times
are stored in the same memory. The
memory has capacity for 99 readings memory has capacity for 99 readings
or 99 hrs, 59 mins or 99 hrs, 59 mins
View total time / View total time / 1. Stop timer / stopwatch. Press 1. Stop timer / stopwatch. Press
lap memory lap memory
2. Press 2. Press + or - to scroll through
3. The latest memory will show 3. The latest memory will show
4. Press 4. Press SET to view total time
5. Press 5. Press + or - to view lap time (at
Delete 1 memory 1. Stop timer / stopwatch
record or all 2. Press SET to view memory record
records 3.The latest memory will show as "M1"
14
SET to view memory record
memory records memory records
as "M 1" as "M 1"
OR OR
least 1 lap must have been taken)