Set The Altitude Alarm / Sea Level / Weather Icon - Oregon Scientific RA202 Manuel D'utilisation

SET THE ALTITUDE ALARM / SEA LEVEL / WEATHER
ICON
From any of the 5 altitude screen displays you can
set the:
• Altitude Alarm - Select alarm to activate above or
below your setting; set altitude alarm
• Sea Level - Select unit hPa or inHg; set sea level
• Weather Icon - 1 of 4 displays to choose from
1. Press FUNC to select altitude alarm, sea level or
weather icon.
3. Press + to change the setting.
4. Press SET to confi rm the setting.
ALTITUDE ALARM
The ascending or descending altitude alarm will be
turned on when the set altitude is reached during an
ascent or descent respectively.
Press any key to stop the alarm sound. If the set value is
reached again, the alarm will be re-activated.
NOTE Setting the altitude affects the sea level Setting the altitude affects the sea level
pressure.
SEA LEVEL
For an accurate reading, you must fi rst calibrate the sea
level pressure. Once the sea level pressure is calibrated,
the altitude will automatically calibrate to the reference
altitude using the built-in auto-calibration function.
When you set the sea level on your watch it adjusts
the altimeter to the current altitude. Information on the
current sea level pressure can be found in newspapers,
local news and radio reports, or on the Internet.
NOTE It is necessary to re-calibrate the sea level It is necessary to re-calibrate the sea level
pressure or altitude if the product is placed in a
pressurised cabinet such as an aeroplane.
12