Playback Menu; System Settings - GUARDO DDC-200 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Exposure
Anti-Shaking
Quick Review
Date Stamp
* Recommended setting

PLAYBACK MENU

Delete / File removal
Protect / File locking
Slide Show
C. SYSTEM SETTINGS
Attention: This menu will not work if Mass Storage mode is activated.
1.
Power on the unit.
2.
Stop the recording if needed.
3.
Press
to enter the menu when the device is in recording mode
4.
Press
again to select the set up menu.
5.
Use the
&
6.
After selection, click
7.
Press
to exit.
8.
The new settings will be applied after restart of the device.
Only works when no recording has been started.
#
LCD Screen OFF
Screensaver when use on battery
Auto Power Off
Automatic power off when use on battery
Frequency
Beep sound
Language
Set Date/Time
Format
In case of problems with your micro SD-card (f.ex.
"Memory full") we recommend formatting your card
from this menu.
Default Setting
Reset to factory settings
Version
* Recommended setting
+2.0 / +5/3 / +4/3 / +1.0 / +2/3 / +1/3 / +0.0 / -1/3 / -2/3 / -1.0 /
-4/3 / -5/3 / -2.0
Off / On*
Off / 2 Seconds / 5 Seconds
Off/ On
Delete Current / Delete All
Lock Current / Unlock Current / Lock All/ Unlock All
2, 5 or 8 seconds
buttons to scroll through the submenu's.
to confirm and save the setting.
-10-
.
#
Off */ 30 sec. / 1 Minute / 2 Minutes
Off */ 3 Minutes / 5 Minutes / 10 Minutes
50 Hz / 60 Hz
Off / On
English, Dutch, French, Spanish, German,
Polish, Czech, Italian
DD/MM/YY and Date /Time
Internal memory / Micro SD card
Cancel / OK

Publicité

Table des Matières
loading

Produits Connexes pour GUARDO DDC-200

Table des Matières