Control Lock - LG WT7250C Série Manuel D'utilisation

2
Press and hold the Spin button for 3 seconds.
• You can change the spin speed by pressing
the Spin button.
3
Press the Start/Pause button to begin.
Cold Wash
Use this option to save energy by using cooler
water while increasing the wash and rinse times to
maintain wash performance.
• Wash time will increase up to several minutes
with this option.
• For best wash results, only wash small loads (less
than 8 lb) with this option.
Delay Wash
Once you have selected the cycle and other
settings, press this button to delay the start of the
wash cycle.
• Each press of the button increases the delay
time by 1 hour, for up to 19 hours.
• Once the desired delay time is set, press the
Start/Pause button to start the delay time.
NOTE
• If the Start/Pause button is not pressed to begin
the delay time, the washer automatically turns
off after a certain time and all cycle settings are
lost.
Water Plus
Use this option to add extra water to the wash
cycle for better wash performance with large or
bulky items.
NOTE
• If the washer reaches its maximum water level,
this button will have no effect.
• To add more water while a cycle is running,
pause the cycle and select this option.
• When you select Normal cycle and Water Plus
option, the cycle will be changed to Deep Wash
cycle before starting.
Signal
The washer plays a melody when the wash cycle is
finished. The buttons make a sound each time they
are pressed.
• Press the Signal button to turn the sounds on or
off.
• When no signal is heard, the signal is off. The
signal can be turned on at any time as long as
the washer is turned on.
Extra Rinse
This option adds an extra rinse to the selected
cycle. Use this option to help ensure the removal
of detergent or bleach residue from fabrics.
• Pressing the Extra Rinse button twice will add
two additional rinses to the cycle.
• If a liquid fabric softener is used, it is always
dispensed in the final rinse.
NOTE
• You cannot select this option with the Spin Only
option and Tub Clean cycle.
• Selecting the Extra Rinse option with the
Normal cycle automatically changes the cycle to
the Deep Wash cycle.
Tub Clean
This is a special function to clean inside the drum
of your appliance.
• To use this function, refer to the MAINTENANCE
for details.
TM
Turbo Wash
Adding this option reduces the cycle time while still
providing similar wash performance to the same
cycle without Turbo Wash
NOTE
• This option cannot be used with all cycles.

Control Lock

Use this function to disable the controls. This
function can prevent children from changing
cycles or operating this washer.
OPERATION 29
TM
.