Cleaning, Maintenance, Storage; General Cleaning Instructions; Cleaning The Fan Wheel; Storage - Grizzly TSP 1100 inox Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
GB
never come in contact with the
mains connection. There is a risk
of electrocution.
Cleaning, Maintenance,

Storage

Clean and maintain your equipment regu-
larly. This will guarantee its performance
and long durability.
Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts.
This will prevent damage to the
equipment and any resulting per-
sonal injury.
Pull out the power plug before
every maintenance operation. There
is a risk of electrocution or of injury
from moving parts.

General cleaning instructions

In case of transport for utilization in
different locations, the pump must be
cleaned with clear water after every use.
In case of stationary installation, the
function of the float switch (
to be checked regularly (at the latest
every three months).
With a water jet, remove fluff and
fibrous particles which are possibly
present in the pump casing
Regularly remove sludge from the pit
base (at the latest every 3 months) and
also clean the shaft walls
Clean precipitation from the float
switch with clear water,
In the case of a long period of non-use,
the pump must be thoroughly cleaned
56
after the last use and before the new
use, since difficulties in start-up can
arise due to precipitation and residues.

Cleaning the Fan Wheel

In case of soiling or blockage of the impel-
ler, this can be cleaned via the pump outlet
(3) or by removing the floor plate (4):
1. Unscrew the bracket adapter
2. Remove the 3 screws on the bot-
3. Clean the fan wheel using clean
4. To re-assemble, reverse this or-
Any measures above and beyond these,
particularly opening the equipment, are
to be carried out by an electrician. In the
case of repairs, always contact our service
centre.
Storage
Keep the equipment clean, dry and out
7) is
of the reach of children.
Unscrew the bracket adapter (
for storage.

Spare parts/Accessories

Spare parts and accessories can
be obtained at
www.grizzly-service.eu
If you do not have internet access, please
contact the Service Centre via telephone.
(
10) from the pump outlet
(
3).
tom of the base (5) and take off
the base plate (4).
water.
der.
10)

Publicité

Table des Matières
loading

Table des Matières