Connection Of Two Units - Yamaha PJP-100UH Mode D'emploi

CONNECTION USING AUDIO CONNECTION CABLES

Connection of two units

After connecting the PJP-100UH to a PC, a second PJP-100UH (slave) unit can be connected to the first PJP-100UH
(master) unit through commercially available audio connection cables (stereo mini-jack cables) to make the system
applicable to conferences in a larger space or with a larger number of participants.
Slave PJP
1
Connect the master PJP-100UH unit and PC
using a USB cable.
See page 8 for details.
2
Connect the AUDIO OUT jack of the PJP-
100UH connected to the PC (master unit) to
the AUDIO IN jack of the second PJP-100UH
(slave unit) using a commercially available
stereo mini-jack cable.
3
Connect the AUDIO IN jack of the PJP-100UH
connected to the PC (master unit) to the
AUDIO OUT jack of the second PJP-100UH
(slave unit) using a commercially available
stereo mini-jack cable.
4
Change the "External input/output" settings
of both the master and slave units.
For details on the setting change, see "Configuring
the Settings" (page 15) and "Configuring the external
input/output setting" (page 18).
• Master PJP-100UH: Set to "Connection(mstr)".
This mode is indicated by
• Slave PJP-100UH: Set to "Connection(slv)". This
mode is indicated by
14
Master PJP
on the display.
on the display.
To USB port