Step 2: Changing The Settings Of Pc - Yamaha PJP-100UH Mode D'emploi

Step 2: Changing the settings of PC

To use this unit as the external microphone/speaker unit of your conference system, perform following settings on the
PC.
The following description takes a PC running Windows XP as an example.
This unit is recognized as a standard USB audio device by the PC.
It is therefore not required to install a driver separately.
1
Click the "Start" menu and click "Settings" -
"Control Panel".
2
Click "Sounds, Speech and Audio Devices".
3
Click "Sounds and Audio Devices".
The "Sounds and Audio Devices Properties" box
opens.
4
5
Click.
Click.
PREPARATION PROCEDURE
Click the "Audio" tab.
Change the settings as follows.
• "Sound Playback" field - "Default device":
YAMAHA PJP-100UH
• "Sound Recording" field: "Default device":
YAMAHA PJP-100UH
Click.
Change.
Change.
9