Connection Using Audio Connection Cables; Connecting Audio Connection Cables - Yamaha PJP-100UH Mode D'emploi

CONNECTION USING AUDIO CONNECTION CABLES

CONNECTION USING AUDIO CONNECTION CABLES
In addition to the PC connection through a USB cable, this unit can be connected to a PC or TV conference system
through audio connection cables. Use the following procedure for the connections and settings.

Connecting audio connection cables

Prepare two commercially available audio connection cables (stereo mini-jack cables).
Note
The following description assumes that the input/output terminals of the PC are colored for distinction. If your PC does not have the
colored terminals, consult the instruction manual for you PC to confirm the functions and locations of the input/output terminals before
connection.
1
Connect the AUDIO IN jack of this unit to the
audio output terminal of the PC or Video
Conference system.
For connection of a PC, connect the cable to the green
terminal of the PC.
2
Connect the AUDIO OUT jack of this unit to
the audio input terminal of the PC or Video
Conference system.
For connection of a PC, connect the cable to the blue
terminal of the PC.
Note
Do not connect the cable to the microphone input
terminal (which is red with the PC) of the PC or
Video Conference system. Otherwise, an excessive
input signal level may degrade the audio quality.
12
2
1
(Blue terminal on PC)
To audio input terminal
To audio output terminal
(Green terminal on PC)