Changing The Settings Of Pc - Yamaha PJP-100UH Mode D'emploi

Changing the settings of PC

The PC settings should be changed so that the audio input
from this unit to the PC is not output to this unit. In
addition, since the audio of this unit is input from the line
input terminal of the PC, it is also necessary to change the
setting so that the audio input from the line input terminal
is accepted.
1
Open the "Sounds and Audio Devices
Properties" box by performing steps 1 to 3
on page 9.
2
Click the "Audio" tab.
3
In the "Sound Playback" field, click
"Volume...".
The "Volume Control" box opens.
Click.
Click.
CONNECTION USING AUDIO CONNECTION CABLES
4
In the "Line In" field, click "Mute" to check it.
5
In the "Sound recording" field, click
"Volume...".
The "Recording Control" box opens.
6
In the "Line-In" field, click "Select" to check
it.
Check.
Click.
Check.
13