Updating The Firmware Manually - Yamaha PJP-100H Mode D'emploi

Updating the Firmware
■ Specifying the URL from which to
download the firmware.
This feature is useful if you want to manage the firmware
version used by the PJPs in you office.
1
Click "Firmware Update" in the Web menu.
The "Firmware Update" window appears.
2
Select "Other", and then enter the URL to be
connected for updating the firmware.
3
Click "Submit".
The URL to be connected when this unit carries out
the firmware update automatically is changed.
To use the latest firmware at all times
In step 2, select "Yamaha website".
46

Updating the firmware manually

When this unit can not be connected to the
Internet, you need to download the latest firmware to your
PC, and then install it using TFTP.
■ Step 1: Confirming the current version
number
Check the "Program Version" on the top of the Web menu.
■ Step 2: Downloading the latest firmware
to your PC
Access the following PJP support page using your PC and
download the latest firmware.
PJP website:
http://www.yamaha.co.jp/english/product/projectphone/
■ Step 3: Installing the firmware to this
unit
Follow the procedure below to install the firmware to this
unit.
Notes
• Once the firmware update is started, do not perform any other
operation until the update operation is completed and this unit is
restarted. If the update operation is interrupted, this unit may
become unusable, in which case you need to return this unit to
the factory for repairs.
• When the firmware update is completed, this unit is restarted
automatically. All of the calls being connected are disconnected
at this time.
• Do not unplug the LAN cable during the firmware update.
Otherwise, this unit could become unusable, in which case you
need to return this unit to the factory for repairs.
1
Show the initial display of this unit.