Making A Call; Calling Another Unit By Specifying An Ip Address - Yamaha PJP-100H Mode D'emploi

Calling another unit by specifying an IP address

Follow the procedure below to specify an IP address to call another unit. Both PJP units should be turned on and
connected to the network with a LAN cable.
1
Press repeatedly until the initial display
appears.
IP: 192.168.0.10
Menu :Address
2
Use the numeric keys to enter the IP address
of the destination unit.
000.000.000.000
^
[ ]
If you make an entry mistake, press
(#) to move the cursor below the number you want to
correct, and use the numeric keys to enter the correct
number.

Making a Call

[#]
(*) or
/
Numeric keys
1 2 3
4 5 6
7 8 9
0
MIC MUTE VOL
MIC MUTE VOL +/–
3
Press .
The calling display appears.
000.000.000.000
^
192.168.100.20
:Cancel
[ ]
Making a Call
[#]
15