Getting Started - Philips 32PW9551 Mode D'emploi

Getting started

The control keys on the TV
The television set has a power key (;) to switch
on/off the set. It is located at the front of the TV.
In the absence of the remote control, you can use
these keys, located either on the top or side of
the TV to do some basic operations:
"VOLUME" keys:
• press either one to adjust the sound level
• press the two keys together and hold will call
up the menu (only for TVs without "Menu" key).
• when in a menu, press either one to select an
item in the menu.
"PROGRAM" keys:
• press either one to select channels.
• when in a menu, press either one to highlight
an item in the menu.
"MENU" key (available in some models):
• press to call up or remove the main menu.
Connections
• Insert the aerial plug into the : socket at
the back of the set.
• Insert the mains plug into a wall socket.
Note: For details on connecting other peripheral
equipment, please refer to the pages on connection in
this manual.

Switching on/off the TV set
• To switch on/off the TV set, press the power
(;) key.
When the set is switched on, a blue indicator will
be lighted near the power button. If the screen
is not activated within a few minutes, the TV is
probably in standby mode.
• Press either one of the PROGRAM keys on the TV
control or the P – or + key on the remote
control to switch on the TV.
Note: Do not leave your set on standby mode for
a prolonged period of time. In standby mode, the
TV consumes less than 1W. In order to be more
environmental friendly, please switch off the set.
Using the Remote Control
• Insert the two batteries (supplied) correctly,
with the + and – aligned as marked on the unit.
You are now ready to use your remote control.
Note: The batteries supplied do not contain mercury
or nicker cadmium. Always remember to dispose
your used batteries in an environmental friendly way.
Replace with the same type of batteries.
CAUTION:
To prevent battery leakage which may result in
bodily injury, property damage or damage to the
unit
• Make sure you insert the batteries using the
correct polarities.
• Do not mix batteries (old and new or carbon
and alkaline etc.)
• Remove batteries when the unit is not in use
for a prolong period.