Hendi 261200 Mode D'emploi page 7

Control panel
Power ON
indicator
Speed con-
trol knob
Speed control
You can control the "browning" evenness of the
toasted bread by adjusting the speed of the con-
veyor.
Light brown
Medium brown
Dark brown
Operation
• Connect the power plug to a suitable electrical
power outlet.
• Power ON the appliance by turning the Heating
control knob to the desired setting (Full power/
Half power/Upper heating only). The power indi-
cator will be light up in green.
• Place the sliced bread on the conveyor by using a
tong (not supplied) to avoid danger of heat burn.
Ensure the bread is evenly placed.
• Rotate the Speed control knob to adjust the
speed of the conveyor & thus the browning even-
ness of the toasted bread.
Heating control knob with ON/OFF switch
OFF position – Switch OFF the appliance
– Provide full heating power for both upper and
lower heating element
– Provide half heating power for both upper and
lower heating element.
It is also for energy saver when not in use for
some time. But under standby condition for
fast heating when required.
– Provide full power to the upper heating ele-
ment only. Used for making bagels or buns.
• When not in use, set the Heating control knob to
the "OFF" position.
• Unplug the appliance from the electrical power
outlet.
• Allow the appliance to cool down completely be-
fore cleaning or storage.
Note: Due to manufacturing residues, the appli-
ance may emit a slight odor. This is normal and
does not indicate any defect or hazard. Make sure
the appliance is well ventilated.
Heating
control
knob
EN
7