Log File; Other Functions; Security; Authentication - Abus IPCS24500 Manuel Utilisateur

8.2.2.2 Log file

The camera's log information can be displayed here. An SD card must be installed in the camera in order to
save log information.

8.2.2.3 Other functions

Enable IR light
The integrated IR light can be enabled or disabled in night mode here.

8.2.3 Security

8.2.3.1 Authentication

This function enables you to protect the video stream of the live view using a user name and password.
Select "Disable" to deactivate this function. To activate this function, select "Basic". If this function is disabled,
the client's RTSP video stream can be requested without authentication.
Apply the settings by clicking "Save".

8.2.3.2 IP address filter

Enable IP address filter
Ticking the selection box enables the filter function.
IP Address Filter Type
Allowed: The IP addresses detailed further below can be used to access the camera.
Forbidden: The IP addresses detailed further below are blocked. An IP is entered in the format
xxx.xxx.xxx.xxx.
87