Configuration; Local Configuration - Abus IPCS24500 Manuel Utilisateur

8. Configuration

8.1 Local configuration

Under the "Local Configuration" menu item, you can select settings for the live view, file paths of the
recordings and snapshots.
Live view parameters
Here you can set the protocol type and the live view performance of the camera.
Protocol
TCP: Complete provision of streaming data and high video quality; however, this affects real-time
transmission is affected.
UDP: Real-time audio and video transmission.
MULTICAST: Use of the multicast protocol (the network components must support multicast). Additional
multicast settings can be found under Configuration/Network.
HTTP: Provides the same quality as TCP; however, special ports are not configured under the network
settings.
Live view performance
You can set the performance level for the live view here.
Live indicator
As soon as this function has been enabled, a frame will be displayed around the triggered area in the live
image for used and triggered motion detection.
81