Cleaning And Maintenance - Bestron ADF900 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
user's instructions

cleAninG And MAintenAnce

Clean the appliance and the loose parts thoroughly after each use:
1. Switch off the deep fryer by turning the On/Off - temperature control knob fully to the left. Disconnect the
plug from the wall socket.
2. Allow the deep fryer to cool.
3. Preference is given to handing in frying oil and fat to your municipality; these can be reused for other
purposes.
4. Remove the remaining oil using absorbent paper kitchen towel.
5. Thoroughly clean the inside of the bowl and frying basket with hot water to which a little washing-up liquid
has been added; do NOT use scourers. Then dry them thoroughly.
6. Clean the housing with a damp cloth, if necessary with an additional couple of drops of washing-up
liquid. After cleaning, dry the housing thoroughly.
7. Reassemble the appliance
8. Keep the appliance in a dry place.
Verify that the appliance is not connected to the power supply before you clean it.
Clean the fondue set after each use.
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
Do not immerse the fondue set in water, or in other liquids.
Some parts of this appliance may be sharp. Be careful not to cut yourself.
cleAninG And MAintenAnce - replacing the filters
The disposable filters are intended to reduce the smell of frying when using the appliance. They become less
effective over the course of time, and for this reason they need to be replaced at regular intervals.
1. Press the lip on top of the ventilation cover and remove the ventilation cover.
2. Remove the filters.
3. Fit new filters (with the white filter at the bottom).
4. Fit the ventilation cover.
the enVironMent
Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to
the symbols on the product, the user's instructions or the packaging.
The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
Contact your municipality for the address of the appropriate collection point in your neighbourhood.
29

Publicité

Table des Matières
loading

Table des Matières