König Electronic KN-HDMIMAT10 Mode D'emploi page 4

Masquer les pouces Voir aussi pour KN-HDMIMAT10:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
Before installation, please make sure all devices you wish to connect have been turned off.
Connect the HDMI input source into the Matrix (Input cables are optional)
Connect the HDMI display devices into the HDMI Output ports.
Insert the DC side of 5 V power supply into the Matrix and then connect the AC side of the
power supply into the wall outlet.
LED indication: when any input source device works or any output sink devices works, the colour of
Power on all input and output devices.
LED relative to the device will be red. When the users select one of the input resource output to the
display devices, the colour of LED for this input interface is blue.
HDMI output
HDMI output
HDMI output
HDMI output
Warning: If a DVI device does not appear to work, make certain that the device is HDCP compliant.
A non-HDCP compliant DVI device will not work with a signal that has HDCP encoding present.
Warning: If a DVI device does not appear to work, make certain that the device is HDCP
Safety precautions:
compliant. A non-HDCP compliant DVI device will not work with a signal that has HDCP
encoding present
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products
should not be mixed with general household waste. There is a separate collections system
for these products.
4x2 matrix switch
To reduce risk of electric shock, this product should ONLY be opened by
an authorized technician when service is required. Disconnect the product
from mains and other equipment if a problem should occur. Do not expose
4
4
HDMI Monitor
HDMI Monitor

Publicité

Table des Matières
loading

Table des Matières