Attaching the CI Card Adapter
Attach the adapter as shown below.
To connect the CI CARD Adapter, follow these steps.
✎
We recommend attaching the adapter before installing
the wall mount, or inserting the "CI or CI+ CARD".
1. Insert the CI CARD Adapter into the two holes on the
product 1.
✎
Please find a two holes on the rear of the TV. A two
holes is beside the
2. Connect the CI CARD Adapter into the
INTERFACE
port on the product 2.
3. Insert the "CI or CI+ CARD".
We recommand that you insert the CI card before you mount the TV on a wall. It may be dificult to
insert after the mounting.
Insert the card after attaching the CI-Module on TV. It is dificult to attach the module if you insert
the card before attaching.
Using the "CI or CI+ CARD"
To watch paid channels, the "CI or CI+ CARD" must be inserted.
•
If you don't insert the "CI or CI+ CARD", some channels will display
the message "Scrambled Signal".
•
The pairing information containing a telephone number, the "CI or CI+
CARD" ID the Host ID and other information will be displayed in about
2~3 minutes. If an error message is displayed, please contact your
service provider.
•
When the coniguration of channel information has inished, the
message "Updating Completed" is displayed, indicating the channel
list is updated.
✎
NOTE
x
You must obtain a "CI or CI+ CARD" from a local cable service provider.
x
When removing the "CI or CI+ CARD", carefully pull it out with your hands since dropping the "CI or CI+
CARD" may cause damage to it.
x
Insert the "CI or CI+ CARD" in the direction marked on the card.
x
The location of the
COMMON INTERFACE
x
"CI or CI+ CARD" is not supported in some countries and regions; check with your authorized dealer.
x
If you have any problems, please contact a service provider.
x
Insert the "CI or CI+ CARD" that supports the current antenna settings. The screen will be distorted or
will not be seen.
Connecting to a COMMON INTERFACE slot
COMMON INTERFACE
port.
COMMON
slot may be different depending on the model.
English - 12
TV Rear