Top And Rear Panels - Vox VC-12SV Mode D'emploi

Top and rear panels

Top panel
1
5
1. BANK UP/DOWN switches
Use these to specify the bank number.
Note: You won't be able to use these switches if the
connected device is in Manual mode. For details on
how to defeat Manual mode, refer to the owner's
manual of the connected device.
2. BANK display
The indication shown in the BANK display will
change according to the mode that's selected
on the VC-12SV, or according to the settings of
the connected device.
BANK display
Bank no. lit when in Channel Select mode
(p.7)
when in Effect on/off mode
(p.8)
, , note name when the Tuner is operating
(p.9)
Bank no. blinking when you're selected a bank
(p.7, 8)
when the connected device is
in Manual mode (p.9)
2 3 4
6
3. TAP switch, LED
By repeatedly pressing this switch at the
desired tempo, you can change settings such as
the delay time.
Note: If you use the TAP switch to change a setting
such as delay, and then save the program on the
connected device, the change you made will be saved
as part of the settings. If you switch to a different
program or power-off the connected device before
saving the program, your change will be lost.
4. TUNER switch / TUNER LED
Press the TUNER switch to activate the tuner.
Press it once again to return to the previous
mode.
The tuning procedure is described in "Tuner"
(p.9).
5. RECALL switch
In Channel Select mode, pressing this switch
will recall the previously-selected program.
Note: You won't be able to use this switch if the VC-
12SV is in Effect On/Off mode, or if the connected
device is in Manual mode. For details on how to
defeat Manual mode, refer to the owner's manual of
the connected device.
7 8 9
5