Main Features - Vox VC-12SV Mode D'emploi

Introduction
Thank you for purchasing the VOX VC-12SV foot
controller. In order to take full advantage of your
new equipment, please read this manual carefully
and use the product correctly.

Main features

When the VC-12SV is connected to a device
equipped with a VOX BUS connector, you'll be
able to perform the following types of operation.
The available operations will depend on the
connected device, so refer to the owner's manual
of that device for details.
• Select programs
• Control volume or wah
• Control time or speed using tap tempo
• Control effect parameters
• Turn effects on/off
• Recall programs (recall the previously-selected
program)
• Use the tuning function
4
Connections
The VC-12SV can be connected to a device
equipped with a VOX BUS connector (or FOOT
CONTROLLER connector).
1. Power-off the device to which you're connect-
ing the VC-12SV.
2. Connect the included cable to the VOX BUS
MAIN jack located on the VC-12SV's rear
panel.
Power is supplied to the VC-12SV from this
connector.
Note: You must use only the included cable (10
Base-T straight cable). Using another cable may
damage the connected equipment.
Note: The included cable is a dedicated cable
intended only for connecting the VC-12SV to
another device. Do not use it for any other connec-
tion.
Connect the dedicated cable here
3. Connect the other end of the cable to the VOX
BUS connector (or FOOT CONTROLLER
connector) of your other device.
Connect the dedicated cable here
VC-12SV