Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung 7 Série Manuel D'utilisation

When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
2
Selecting Store Demo
or Home Use
3
Selecting a country
4
Selecting an antenna
5
Selecting a channel
6
Setting the Clock
Mode
7
Time Zone
8
Viewing the HD
Connection Guide.
9
Enjoy your TV.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0." If you want to
change the PIN number, use the Change PIN function.

Connecting to an Antenna

Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
y
Select the Home Use mode. Store Demo Mode is for retail
environments.
y
Return the unit's settings from
(standard): Press the volume button on the TV. When the OSD
volume is displayed, press and hold
Press the ▲ or ▼ button, then press the ENTERE button.
Select the appropriate country. If the desired country does not exist on the menu, select
Others.
✎
After selecting the country in the
additional option to setup the pin number.
✎
When you input the PIN number, 0-0-0-0 is not available.
Press the ▲ or ▼ button, then press the ENTERE button.
Select Air or Cable.
Press the ▲ or ▼ button, then press the ENTERE button.
Select the channel source to memorise. When setting the antenna source to Cable, a step
appears allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to Channel → Auto Store (p. 14).
✎
Press the ENTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
✎
If you select the Auto, select the time zone which you live.
Press the ▲ or ▼ button to select the your time zone, then press the ENTERE button.
(depending on the country)
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
or
Store Demo to Home Use
MENU for 5 sec.
Country menu, some models may proceed with an
VHF/UHF Antenna
Cable
ANT OUT
Y
POWER
P
7
English