Oki MC860 MFP Mode D'emploi page 12

Walk-up Operation
Scanning (cont.)
Scan to USB Memory
Send scanned documents to a
USB device plugged into the unit.
1. Plug a USB device into the port
on the front of the unit.
2. Load the document (see pages
6-7).
3. Press the Scan button.
4. On the touch screen, press
.
Memory
5. Using the touch screen, enter a
file name and set any scanning
options you require.
6. Press the M
C button to begin
OLOR
scanning.
Note
To cancel the process at any
time, press the S
7. Once the scan is complete, the
unit beeps and displays a
confirmation message.
8. Remove the USB device from
the port.
button or the
ONO
button.
TOP
Scan to Local PC
Notes
•
•
•
1. Load the document (see pages
6 and 7).
2. Press the Scan button.
3. On the touch screen, press
Local PC
4. On the touch screen, select
from the following options.
Your selection will activate the
appropriate portion of the
USB
Actkey utility.
• Application
• Folder
• E-Mail
• PC-FAX
5. Press the M
C
OLOR
12 English
•
The unit must be
connected to your PC via
USB.
The Actkey utility must be
installed and set up.
The scan is set up at the
MFP unit (push scan).
.
button or the
ONO
button.