Application And Function - RODCRAFT RC9026 Manuel

Dear customer!
Rodcraft Pneumatic Tools GmbH thanks you for the purchase of one of our products and invites you to reading this user manual.
All necessary information for an adequate use of the purchased equipment is contained herein: it is advisable to read everything from cover to cover and to
observe the references.
Please keep the user manual in good order. The contents of this manual may change without prior notice and without further obligations, so that changes
and improvements can be inserted into already distributed copies.
It is our aim to manufacture products, with which you can work as safe and effi cient as possible. Most important for your safety are your caution and
judgment in handling this product and other tools. These safety precautions contain some of the important sources of danger; however, they cannot cover all
possible risks.
Without prior written permission of the manufacturer copying or translation of any part of this manual is prohibited.
Values
Drive Torque RPM
n
0
[inch] [Nm] [min
M M
Models
max
57
½´´ 1700
RC9025 575
5
Charger:
Model: 9025C
Input: 100-240V~50/60Hz 90W
Output: 10.8-18V d.c. 3.4A
Charger Type: Class 2
Battery:
Model: 9025B
Voltage: 18V d.c.
Charge: 2.6Ah
Battery Type: Li-Ion
Optimal temperature
for charging : 10-40°C

2. Application and Function

• An impact driver is a tool used to loosen or tighten screw connections, so
that a positive connection is opened or joined.
• An impact driver should only be used to loosen or tighten screw connec-
tions and must never be used in any other way.
• Never use the impact driver for anything but its intended use.
• Please read the product safety information carefully!
a
c
axbxc
Weight Voltage
d.c.
-1 [mm]
] [kg] [V]
(w.
Li-Ion
battery)
2.2 254x80
18.0
(2.9) x269
RODCRAFT PNEUMATIC TOOLS GmbH
EN
b
Charg- Cycles
Charge ing when Battery is fully
Time charged
Wheel Nut
[Ah] [h] [21mm]
Ø
2.6 1 150 300
3. Inspection – Scope of Delivery
Open the packing and check the equipment for transport damage and that
all parts specified in the shipping documents are at hand. Before using the
equipment conduct a visual inspection in order to determine leakages,
damages, loose or missing parts.
Scope of delivery:
1 x Impact driver RC9025
2 x Rechargeable batteries 9025B
1 x Charger with mains cable 9025C
1 x Carry case
1 x Operating Manual
1 x Safety Instructions
1 x EC Declaration of Conformity
1 x Replacement part list
Noise Noise
Vibration
LpA LwA
[dB(A)] 2
[dB(A)] [m/s
150 87.9 98.9 4.26
]
8