Application And Function - RODCRAFT RC7682K Manuel

Dear customer!
Rodcraft Pneumatic Tools GmbH thanks you for the purchase of one of our products and invites you to reading this user manual.
All necessary information for an adequate use of the purchased equipment is contained herein: it is advisable to read everything from cover to cover and to
observe the references.
Please keep the user manual in good order. The contents of this manual may change without prior notice and without further obligations, so that changes
and improvements can be inserted into already distributed copies.
It is our aim to manufacture products, with which you can work as safe and effi cient as possible. Most important for your safety are your caution and
judgment in handling this product and other tools. These safety precautions contain some of the important sources of danger; however, they cannot cover all
possible risks.
Without prior written permission of the manufacturer copying or translation of any part of this manual is prohibited.
Model Drive
Spindel Disc [mm]
50 (2")
RC7682 5/16'' FT
75 (3")
FT = Female Thread max. pressure 6.3 bar (90 psi)

2. Application and Function

• A random orbital sander is a tool used for smoothing and removing material from surfaces by means of sandpaper in order to achieve a desired fi nish.
• A random orbital sander should only be used to smooth surfaces with sandpaper and must never be used in any other way.
• Do not misuse the random orbital sander.
• Please read the product safety information carefully!
3. Inspection – Scope of Delivery
Open the packing and check the equipment for transport damage and that all parts specified in the shipping documents are at hand. Before using the
equipment conduct a visual inspection in order to determine leakages, damages, loose or missing parts.
Scope of delivery:
1 x
1 x
1 x
1 x
1 x
1 x
1 x
1 x
1 x
10 x
10 x
10 x
10 x
10 x
10 x
Hose
Speed
Power Weight
Diameter
-1
[W] [min ] [kg] [mm]
150 15000 0.53
RC7682K
Smart Repair random orbital sander
Wrench
Dehumidifi er packet
User manual
Safety instructions
EC Declaration of Conformity
Spare part list
3" Velcro backing plate 5/16-24UNF
2" Velcro backing plate 5/16-24UNF
3" Sandpaper sheet, grain 600
3" Sandpaper sheet, grain 320
3" Sandpaper sheet, grain 180
2" Sandpaper sheet, grain 600
2" Sandpaper sheet, grain 320
2" Sandpaper sheet, grain 180
RODCRAFT PNEUMATIC TOOLS GmbH
EN
a
b
Air
Dimensions
Consumption
average –
axbxc
continuous
[mm] [l/min]
8 125x125x42 380 510
RC7682
1 x Smart Repair random orbital sander
1 x Wrench
1 x Dehumidifi er packet
1 x User manual
1 x Safety instructions
1 x EC Declaration of Conformity
1 x Spare part list
Sound-
Sound-
Air
power
pressure
Inlet
LpA LwA
[Inch] [dB(A)] [dB(A)]
1/4'' FT 79.6 90.6
Vibration
2
[m/s ]
8.9
7