Configuration: Time; Configuration: Firmware Update; Configuration: Remote Access; About Dl2 - De Dietrich DL2 Manuel

DL2

10.3 Configuration: Time

10.4 Configuration: Firmware Update

10.5 Configuration: Remote access

10.6 About DL2

In the configuration window „Time", carry out the following
settings:
Enter the timezone
«
Adjust the update interval
«
Enable / disable the network time synchronisation function
«
Enter NTP server address
«
Manually adjust the time settings
«
In the configuration window „Firmware Update" , carry out
the following settings:
Enable / disable automatic firmware update
«
Enter update URL
«
Adjust update interval
«
The firmware update ensures that the internal software of
the DL2 is always up to date.
Enter old remote access password (factory setting: vbus)
«
Enter new remote access password
«
Confirm new password
«
These adjustments are required for accessing the controller
via the datalogger by means of the Service Center Software
or the Data Center.
In this window, details about open source applications and
libraries covered are shown.
35
|