Clutch Maintenance - DK2 POWER OPC514 Guide De Montage

MAINTENANCE & STORAGE
CENTRIFUGAL CLUTCH TECH TIPS

CLUTCH MAINTENANCE

The centrifugal clutch on this machine is permanently lubricated and does not require oil or
grease. If, after long periods of use, the drum wobbles excessively, replace the drum assembly.
Always replace shoes and springs in sets. Whenever shoes are changed, replace all springs.
CLUTCH REMOVAL
1. Remove clutch from shaft by removing bolt and washers.
2. Slide clutch off shaft.
Remove key from keyway.
3.
INSTALLATION OF A NEW CLUTCH
1. Clean shaft and remove any burrs.
2. Apply anti-seize compound to the shaft.
3. Place key in keyway on shaft.
4. Slide clutch onto shaft, secure with bolt, flatwasher and lockwasher.
5. Tighten two allen head set screws.
OPC514 man. v.210412 | 43