Adding Fuel - DK2 POWER OPC514 Guide De Montage

OPERATION
PROPER USE GUIDELINES
CHECKING AND ADDING OIL
• Check oil level before starting engine.
• Check oil level daily, or after every eight hours.
• Keep oil level at FULL.
• Do not overfill.
OIL FILLING PROCEDURE
Please follow your Kohler Manual for instructions on filling the oil in your machine.
OIL CHECKING PROCEDURE
Before starting engine, check oil level.
1.
2. Place engine level. Clean around oil fill and dipstick.
3. Push dipstick back in and remove to check oil level.
4. Remove oil fill cap. Pour oil slowly.
5. Fill to FULL mark on dipstick - re-check
6. Replace dipstick firmly.
FUEL
• Use clean, fresh, regular unleaded gasoline as per the Kohler Manual.

ADDING FUEL

• Fill tank outdoors or in a well-ventilated area, away from sparks, open flames, pilot lights, heat
and other ignition sources.
• If fuel spills, wait until it evaporates before starting engine.
• Turn engine OFF and let engine cool at least 2 minutes before removing gas cap.
• Remove cap. Fill tank to approximately 1-1/2 inches below top of neck to allow for fuel expansion.
Be careful not to overfill. Replace cap before starting.
OPC514 man. v.210412 | 29