DK2 POWER OPC514 Guide De Montage page 22

STEP 3: ATTACHING THE HITCH ARMS AND TRAILER HITCH
1. Attach the coupler (47) to the tow bar (46) using M12x80 hex bolt (52), flat washer 12 (53) and
M12 lock nut (54).
Attach the tow bar (46) to the chassis (1) using M12x70 hex bolt (61), flat washer 12 (53) and
2.
M12 lock nut (54).
3. Attach the jockey wheel (48) to the tow bar (46) using M10x60 hex bolt (49), flat washer 12
(53) and flat washer 10 (50).
22 | OPC514 man. v.210412
ASSEMBLY
STEP BY STEP INSTRUCTIONS