Package Contents; Tools Required For Assembly; Unpacking And Checking The Contents - DK2 POWER OPC514 Guide De Montage

SKID
CHIPPER
HITCH ARMS
HITCH ASSEMBLY
PARTS BOX

TOOLS REQUIRED FOR ASSEMBLY

• 1/2" Wrench or Socket - 2 required
• 3/ 4 " Wrench or Socket - 2 required

UNPACKING AND CHECKING THE CONTENTS

• Remove all the items from the crate.
• After unpacking the crate, compare the contents with the list above.
• If any parts are missing, please contact DK2 POWER directly.
• Assembly should be done on a clean, level surface.
16 | OPC514 man. v.210412
ASSEMBLY

PACKAGE CONTENTS

PARTS BOX
CHIPPER HOPPER
STAND
GLASSES
OWNER'S MANUAL
ENGINE MANUAL
BOLT BAG
WIRE HARNESS
10 EA - 14 1/2" CABLE TIES
BLADE GAUGE
BOLT BAG
4 EA - 5/16-18 X 3/ 4 " CARRIAGE BOLTS
4 EA - 5/16-18 NYLOCK NUT
4 EA - 5/16 USS FLATWASHER
2 EA - 1/2-13 X 3" HHCS
4 EA - 1/2 -13 X 1 1/ 4 " HHCS
2 EA - 1/2-13 GRIPCO NUT
1 EA - 3/16 HAIR COTTER PIN
2 EA - HITCH ARM MOUNTING PLATES
2 EA - ENGINE KEY