Publicité
Les langues disponibles
Les langues disponibles
User Manual
Installation is simple, make sure that all devices are powered off and then connect the cables as shown
in the example installations according to your requirement. Now connect the provided power supply and
power on all devices, the power led on the front panel will illuminate.
The Extractor features two sets of dip switches which all you to configure the device to meet your
requirements please refer to the following tables which cover the Audio Embedding and Audio Extracting
functions:
Audio Embedding (Rear Panel)
DIP Switch Position
2-Pin
ON []
PIN#1
OFF []
ON []
PIN#2
OFF []
Audio Extracting (Front Panel)
DIP Switch Position
4-Pin
ON []
PIN#1
OFF []
ON []
PIN#2
OFF []
ON []
PIN#3
OFF []
ON []
PIN#4
OFF []
* Note: When HDMI ARC is enabled audio output is only possible via TOSLink. In addition when HDMI
ARC is enabled audio extraction from an HDMI source connected to HDMI In can only be achieved via
the 3.5mm stereo interface.
For installations using multiple HDMI sources, position the Audio Extractor between a HDMI switch and
HDMI display equipment. Installations using multiple HDMI displays require the Audio Extractor to be
positioned before a HDMI splitter.
Description
Enable Audio Embedder Function
Disable Audio Embedder Function
Audio Embedding from Toslink
Audio Embedding from 3.5mm
Description
Enable Audio Extractor Function (via Toslink & 3.5mm)
Disable Audio Extractor Function
Enable ARC Function
Disable ARC Function
No Function
No Function
Firmware Update Mode
Normal Mode
*See Note
English
Publicité
