Publicité
Les langues disponibles
Les langues disponibles
User Manual
Installation and operation
The following graphics show the Audio Extractor connected in two typical set ups:
Audio Embedding
Bluray Player
HDMI Cable
Audio Cable
For Audio Embedding, where an external audio source is used to replace the original HDMI audio, an
HDMI source (e.g. Bluray player) is attached to the HDMI input port using a HDMI cable and the audio
source (e.g. CD player) is connected using either TOSLink or Phono/3.5mm to 3.5mm cable to the
corresponding input port. The HDMI output port is then connected to a HDMI display.
Audio Extraction
HDMI Cable
Audio Cable
For Audio Extraction, where audio is extracted either from an HDMI source or from an HDTV's ARC
channel, the HDMI source (e.g. Bluray player) is attached to the HDMI input port using a HDMI cable
and an external sound device or devices (speakers, sound bar or amplifier) are connected using either
TOSLink or 3.5mm to Phono/3.5mm cable connected to the corresponding output port. The HDMI output
port is then connected to an HDMI display using a HDMI cable.
Rear Panel
Bluray Player
Rear Panel
Speakers
CD Player
Front Panel
Front Panel
English
HDTV
HDTV
Publicité
