GE JCBP40 Manuel Du Propriétaire page 20

Special features of your oven control.
+
20
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Touch the BROIL and BAKE pads at
the same time for 3 seconds until
the display shows SF.
Touch the CLOCK pad once. The
display will show 12 hr. If this is
the choice you want, touch the
START pad.
Using Convection Conversion
By using the Convection Conversion feature, you
can automatically convert the oven temperature
from regular baking to Convection Bake
temperatures.
To convert the oven temperature for
convection baking, follow the steps below.
Touch and hold the CONVECTION
BAKE pad for 4 to 5 seconds.
Using the number pads, enter
the temperature recommended
in the recipe.
Touch the CLOCK pad again to
change to the 24 hour military time
clock. The display will show 24 hr.
If this is the choice you want, touch
the START pad.
Touch the CLOCK pad again to black
out the clock display. The display will
show OFF. If this is the choice you
want, touch the START pad.
NOTE: If the clock is in the black-out mode you
will not be able to use the START TIME function.
Touch the START pad.
The display shows the converted
(reduced) temperature. For
example, if you entered a recipe
temperature of 177°C (350°F), the
display will show 163°C (325°F) when
it is converted.
Touch the OFF pad when baking is
finished.
NOTE: Conversion must be set each time
you want to use it. It is not held in memory.
Conversion is used on Convection Bake only.